Mimosa-NI Telescope

Introduction

The aim of this document is to help users take data with the ANEMONE pixel telescope. It is intended to provide all necessary information to get studied and to provide help in case of known problems. For a more detailed documentation separate documents will be prepared and made available.

In Chapter impat a short guide to lead you through the steps needed to start and stop a run is given. Nevertheless we strongly recommend reading the subsequent sections as well. In Chapter hardware an overview of the hardware is given, Chapter switchon explains how to switch the telescope hardware on. Chapter running describes the DAQ software and how to run it. Chapter checking describes how to ensure proper runniing of the telescope. The telescope geometry is described in Chapter telegeom. Following that you can find a few hints what to do in case of trouble in Chapter trouble.

This document describes the status of the ANEMONE (A Nice Eudet Mimosa bONn tElescope) telescope in May 2012. Since the hardware is under continuous development, changes to the presented information are possible. Please report comments to

Telescope characterization

Resolution

Useful Links

• WiKi : Pixel Beam Telescope reconstruction software tutorial
• Indico : Pixel Beam Telescope reconstruction software tutorial