JSON based on CMS "muon json" & excluding LS with Calibration Data:

• Special90m.json: Special90m.json

Recorded luminosity : 5.35/pb (Brilcalc output: : out.csv)

CMS certified:

GOLDEN JSON : /afs/cern.ch/cms/CAF/CMSCOMM/COMM_DQM/certification/Collisions18/13TeV/PromptReco/Cert_319104-319311_13TeV_PromptReco_SpecialCollisions18_TOTEM_JSON.txt with recorded luminosity : 5.288 /pb

Muon Physics JSON : /afs/cern.ch/cms/CAF/CMSCOMM/COMM_DQM/certification/Collisions18/13TeV/PromptReco/Cert_319104-319311_13TeV_PromptReco_SpecialCollisions18_TOTEM_MuonPhys.txt with recorded luminosity : 5.586 /pb

Fill 6877 HF threshold=9

• Runs 319099 (L0) 319100 (L0-1) 319101 (L0+1) ==> strips latency scan
• Run 319104 -- physics

---

Fill 6879 HF threshold=9

• Run 319124
  • LS=125 -148 Calibration

prescale | Totem1 0x22 | Totem2 0x16 | Totem3 0x8 | Totem4 1 |

* LS>148 Physics

Totem1 0x90 | Totem3 0x60 | Totem2,4 1 |

• Run319125 physics, same prescales

---

Fill 6881

• Run 319159

• • LS>164 Calibration

Totem1 0x68 | Totem2 0x1a | Totem3 0x30 | Totem4 0x2 |

• • LS 202-252 : TOTEMX prescaled = 0 at L1, HLT seeds only TOTEM&HF_veto

Totem1 0x150 | Totem3 0xcf |

• • LS = 252 (column 300)

TotemX not prescaled at L1, ZB higher than usual (wrong ZB prescale)

• Run319160

phyiscs run with column "732" modified, ie TotemX not prescaled =0

---

Fill 6682

• Run 319174 - 319177

• • Calibration:

Totem1 0x68 | Totem2 0x1a | Totem3 0x30 | Totem4 0x2 |

• • LS>20

Totem1 0x150 | Totem2 1 | Totem3 0xcf | Totem4 1 |

---

Fill 6684 HF threshold=17

• Run319190

• • Calibration:

LS>16 Totem1 0x40 | Totem2 0x4a | Totem3 0x10 | Totem4 0x2 |

• • LS>37

Totem1 0xd0 | Totem2 1 | Totem3 0x100 | Totem4 1 |

• • LS=124 Test column with Totem2=0

---

Fill 6885 HF threshold=12

• • Run319122

Reduced bunch list for Totem2/Totem3 : 487/732

• • Calibration:

LS>171 Totem1 0x68 | Totem2 0x10 | Totem3 0x60 | Totem4 0x3 |

LS>=191

Totem1 0x180 | Totem2 0x2 | Totem3 0x100 | Totem4 1 |

Problem with HLT*PixelCluster*Layer3 --> noisy ROC

• Run319123 : column 732_onlyTracks Totem2 1

---

Fill 6890

• Run 319254

• • Calibration: LS>154

Totem1 0x70 | Totem2 0x20 | Totem3 0x8c | Totem4 4 |

Reduced bunch list for Totem2/Totem3 : 2/3

Totem1 0x1e0 | Totem2 1 | Totem3 0x200 | Totem4 1 |

• Run319254 - 318255

same

• Run 319256

LS=37 Reduced bunch list for Totem2/Totem3 : 3/4

• run 319260 Hcal out

• run 319262 Hcal back in

• • LS87

Reduced bunch list for Totem2/Totem3 :4/5

• run319268
  • LS186 Reduced bunch list for Totem2/Totem3 : 5/6
  • LS 197. reloaded because missing 1 bunch on CMS fork (still missing)

• run319270

LS=1 Reduced bunch list for Totem2/Totem3 :6/7

* run319273 * run319274

---

Fill 6891

*Run319300

• • LS=26 Calibration

Reduced bunch list for Totem2/Totem3 :1/2

Totem1 0x100 | Totem2 0x23 | Totem3 0xA0 | Totem4 0x8 |

• • LS=55 Bunch list for Totem2/Totem3 :full

Totem1 0x400 | Totem2 0x3 | Totem3 0x500 | Totem4 0x1 |

• • LS=210

BEAM SEPARATION (~300um Vertical)

Bunch list for Totem2/Totem3 :4/5

Totem1 0x200 | Totem2 0x1 | Totem3 0x200 | Totem4 0x1 |

• • LS=603

Bunch list for Totem2/Totem3 :5/6

• • LS=870

Bunch list for Totem2/Totem3 : 6/7

• • LS=987 6/7

Bunch list for Totem2/Totem3 : full

---

Fill 6892

*Run319311

• • LS=23 Calibration

Reduced bunch list for Totem2/Totem3 :1/2

Totem1 0x100 | Totem2 0x23 | Totem3 0xA0 | Totem4 0x8 |

• • LS=58

Reduced bunch list for Totem2/Totem3 :3/4

Totem1 0x200 | Totem2 0x1 | Totem3 0x200 | Totem4 0x1 |

* LS=76

Reduced bunch list for Totem2/Totem3 : 4/5

* LS=274 Beam head-on

Reduced bunch list for Totem2/Totem3 : 1/2

* LS=300 Beam head-on

Reduced bunch list for Totem2/Totem3 : 2/3

* LS=323 Beam separated 0.5sigma

* LS=522-528 Beam separated

Reduced bunch list for Totem2/Totem3 : 3/4 {1 bx missing in Totem1-3}

* LS=829-838 Beam separated

Reduced bunch list for Totem2/Totem3 : 4/5

* LS=1237 Beam separated

Reduced bunch list for Totem2/Totem3 :5/6

* LS = 1252 LHC switched on the orbit feedback and the lumi reduced from 3.05 to 2.9e31

* LS = 1311-1333 scan , max lumi 3.05e31

no changes in prescale

* LS ~ 1495

Reduced bunch list for Totem2/Totem3 : 6/7

* hlt.txt: HLT description

Main DS for checks during the run:

- Express should contain most of the relevant DS

- During alignment run (pixel not available) the RP triggers TOTEM1,2,4 are saved in HLT_L1RomanPot_part[0:3] and included in programmable TOTEM1part[0:3]

- L1_TOTEM_3 --> DS=TOTEM3

- ZeroBias data are in : ZeroBiasTOTEM1/2/3/4 [these names have no relation with Totem bits!]

- HF veto triggers --> DS= HFvetoTOTEM

- empty BX --> DS=EmptyBX

- non colliding --> DS=NoBPTX

https://its.cern.ch/jira/browse/PDMVRERECO-13

Phat Srimanobhas added a comment - 19/Feb/19 2:33 PM - edited

Re-Reco with prompt condition on

Dataset /TOTEM20/Run2018B-v1/RAW Dataset /TOTEM40/Run2018B-v1/RAW

cmsDriver is expected to come from RECO conveners,

https://hypernews.cern.ch/HyperNews/CMS/get/recoDevelopment/1626.html

No DQM is expected. The output is RECO datatier. Permalink prebello Patricia Rebello Teles added a comment - 19/Feb/19 2:40 PM

staging requested

https://its.cern.ch/jira/browse/CMSTRANSF-52 Permalink srimanob Phat Srimanobhas added a comment - 20/Feb/19 7:25 AM

cmsDriver.py RECO -s RAW2DIGI,L1Reco,RECO,EI,PAT --runUnscheduled --nThreads 8 --data --era Run2_2018_highBetaStar --scenario pp --conditions 101X_dataRun2_Prompt_v11 --eventcontent RECO,AOD,MINIAOD --datatier RECO,AOD,MINIAOD --customise Configuration/DataProcessing/RecoTLR.customisePostEra_Run2_2018 --filein /store/data/Run2018B/TOTEM20/RAW/v1/000/319/311/00001/FEDF8077-BD81-E811-947B-FA163E07250E.root -n 1000 --customise Configuration/DataProcessing/Utils.addMonitoring --python_filename=PromptReco_Run2018B_TOTEM20.py --no_exec