#*******************************************#
#*                                         *#
#*      Configuration file for SSD DA      *#
#*                                         *#
#*******************************************#

DDLMapFile        ssdddlmap_v.txt               # file name with SSD DDL map, must be in DaqDB
BadChannelsFile   badchannels_nf.root           # file name with the static list of bad channels, must be in DaqDB
 
#ZsDefault         0       # default value for ZS threshold
#OffsetDefault     1       # default value for offset correction

#OffLadder    c604 c601 c508 c609 a615 a613 a624 a622
#OffLadder    c525 c607 f34
#OffLadder    a625 #a507

#ZSMinValue     2         # minimum value for ZS threshold, has less priority then ZsDefault
#MergeBCFlag    0         # if set static bad channels map is merged with dynamic one for OCDB file
#CheckChipsOff  1         # if set check if there are chips and modules which are off but not on the OffLadder

# It is not recommended to use and/or modify the following parameters

NModulesToProcess          648   # number of modules whose raw data allocated in RAM for calculation
#ZsFactor                  3.0   # zs factor 3.0
#PedestalThresholdFactor   3.0   # configuration parameter: ThresholdFactor for pedestal calculation
#CmThresholdFactor         3.0   # configuration parameter: ThresholdFactor for CM calculation